Detailed Notes on alliant rl 25

Detailed Notes on alliant rl 25

Blog Article

As for all other powders, possibly have a difficulty with them not being able to remain under Functioning pressures at more than 1300fps considering that they've a faster burn off level that St marks 296, or burn so warm that they just burn off up the hulls rapidly isntead.



Have shot in -twenty already. Each time a superior stiff breeze will come out on the north, one individual constantly suggests "It is a dry cold".

Thanks a great deal for responding to my question. I a short while ago bought a completely new Spolar. I didnt have this issue with my older Spolars.

Dano523 said: Only dilemma with not reaming the shot bushing to throw 226 of shot inside a HS hull with .296" powder bushing, is definitely the shot is going to rattle from the shell (my Edition of a exercise only load In the event the shot rattles once you shake the spherical). Click on to extend...

Rem. and Win. hulls are interchangable with loading data as They are really equally tapered hulls, but wad top is somewhat higher to the Rem Wad that makes for a better crimp

The rest of the powders for 410 loads, Have a very burn up velocity of around 295, and just end up burning up the hulls quickly to start with, and won't ever manage to obtain the 1350fps prior to the ammo goes about strain.




Five pellet loads of OOO can be a bit iffy considering that depending on precise diameter and alloy of your pellets a single is using the whole load pounds Visit This Link of all 5 pellets can exceed 3/4-oz.

I can confirm from initial hand expertise the 13gr. load works just like a attraction that has a load of three @ 0.395" balls; my loads ended up plastic shells check it out but I see no purpose why it would not perform with full size metallic shells.

You could check out this other Accurate Powder if this 1 doesn’t suit your necessities or pursuits. For more information about this accurate smokeless powder load data.

As pointed out, the crimps on the two 28 gauge and .410 bore STS hulls will turn out to be unusuable right after 5 or 6 reloads. If you're able to pick them up cost-free They are value making use of awhile but they don't seem to be truly worth paying just about anything for.

This is often an older thread, you may not get a response, and could be reviving an old thread. You should contemplate creating a new thread.

At Ibericafé we provide our collaborators with technical reviews with regard to the evolution from the markets.




While I haven't experimented with it I concur along with your wondering on the four ball load, seems like the identical difficulty as I previously stated that has a five pellet load of OOO buck.

If The key reason why that you'll be swapping powders is due to migration difficulty of your fantastic ball powder rendering it way past the seal and clogging the equipment, John and I have think of powder type seals that appropriate the issues within the PW devices, and the design might be transformed more than into the Spolar devices also.